Your shopping cart is currently empty

Your cart is currently empty.

 

  • This kit provides the components required to obtain RPM and vehicle speed signals from the GM E38 ECM used by the 2010-2015 Chevrolet Camaro, 2007-2013 Chevrolet Silverado, and 2007-2013 GMC Sierra.  The GM E38 ECM is capable of outputting both tach and vehicle speed signals, but this information is not required for other modules in…

  • If you are looking for a simple solution to obtain RPM and vehicle speed signals for the Cortex EBC on your CAN equipped vehicle then the CB-2 Can Bus Interface from Sailes Automotive Electronics is a great solution. Simply connect and go, no complicated programming required. The CB-2 CAN Bus interface is designed to provide a vehicle speed pulse…

  • Glass filled black nylon hose tee. Barb Size: 3/16 Inch

  • The Cortex EBC Solenoid/Pump Driver will allow you to take control of your nitrous injection, water/methanol injection, or intercooler sprayer system with the programmable outputs available on the Cortex EBC.  These modules use the output signal from your Cortex EBC to activate a high-current switch capable of turning on/off in less than 1 microsecond, allowing for precision PWM based control…

  • The Cortex EBC VR Sensor Conditioner provides a simple interface for connecting magnetic or variable reluctance (VR) type sensors to the Cortex EBC electronic boost controller.  Based on the MAX9924 IC, these conditioners take the AC waveform produced by a VR sensor and output a +12V square waveform that matches the frequency of the sensor signal. The…

  • Cortex EBC 4-Port Boost Control Solenoid

    If you are looking to achieve the widest range of possible boost levels or need to combat boost taper caused by exhaust manifold back pressure a 4-port boost control solenoid is your best option.  Our 4-port boost control solenoids are compatible with the Cortex EBC as well as many factory and aftermarket engine management systems including AEM, Haltech,…

  • On sale!

    If you plan to use the outputs available on the Cortex EBC to control your water/methanol injection pump adding a flow sensor to your system will allow you to optimize your PWM settings to provide the correct flow under any driving conditions.  In addition it will allow you to disable boost control to save your…

  • Posi-Tap connectors are a great way to connect the RPM, TPS, and vehicle speed inputs on the Cortex EBC to your vehicle's wiring harness.  They are easy to install, provide a solid electrical connection, and leave minimal impact on wires if they need to be removed. Accessory Lead Size: 18-24 AWG Tap Size: 18 AWG…

  • Posi-Lock connectors are a great way to connect two wires without soldering them together.  They are easy to install and provide a very solid electrical connection.  Available in two sizes to accommodate most wires from 14-24 AWG. Wire Size: 14-16 AWG or 18-24 AWG

  • The SIRHC Labs Speed Sensor Adapter converts the AC signal produced by variable reluctance (VR) sensors to a 0-12V square waveform that can be interpreted by most electronic devices requiring a digital RPM or speed signal.  Possible applications include engine control modules, tachometers, speedometers, nitrous controllers, water/methanol injection controllers, and the Cortex EBC. These adapters…

  • The Cortex EBC Complete Kit includes everything required for a full controller installation on most vehicles.  This kit is intended for those who are installing a turbo on a previously naturally aspirated engine or who require a boost control solenoid, hose, fittings, etc. for a complete installation. This version includes a 52mm round external display.…

  • The Cortex EBC Solenoid/Pump Driver will allow you to take control of your nitrous injection, water/methanol injection, or intercooler sprayer system with the programmable outputs available on the Cortex EBC.  These modules use the output signal from your Cortex EBC to activate a high-current switch capable of turning on/off in less than 1 microsecond, allowing for precision PWM based control…