Low Amp Solenoid Driver

The Low Amp Solenoid Driver is a solid state relay (SSR) that has been specifically designed to provide optimal pulse width modulated (PWM) control of high-speed water/methanol injection solenoids and fuel injectors.  Each driver can provide progressive control for a single high-speed solenoid or fuel injector that draws 4 Amps or less.  When using PWM to control a solenoid there is a limit to how quickly the solenoid is able to open and close.  Below a certain duty cycle the solenoid will never open, and above a certain duty cycle the solenoid will never close.  While the opening time is primarily determined by battery voltage, the closing time can vary greatly depending on the hardware being used to control the solenoid.  The hardware inside of the Low Amp Solenoid Driver has been designed to minimize the time required for your solenoid to close, allowing you to achieve the maximum possible dynamic flow range from your injection system.

NOTE:  This device is intended for intermittent operation and should not be used for applications that require the solenoid to be pulsed at all times when the vehicle is running.