Cortex EBC Complete Kit with External Mini Display

Cortex EBC Kits are now available with internal displays only.  The external display options have been permanently discontinued.

This product is currently out of stock and unavailable.

BCS Options

The Cortex EBC Complete Kit is available with either a 3-port or 4-port boost control solenoid (BCS) to match the boost control requirements of your specific application.

A 3-port solenoid is recommended for most users.  They are easy to tune, provide very precise boost control, and are capable of producing boost levels 2 to 3 times greater than wastegate spring pressure on most applications.

The 4-port solenoid is available for applications that need to achieve a very wide range of boost levels based on gear or vehicle speed.  They can be more difficult to tune than a 3-port solenoid, but can produce boost levels that are 4 or more times higher than wastegate spring pressure on most applications.  For additional information on how this type of solenoid controls boost see the 4-Port BCS product page.

3-PORT BCS OVERVIEW

  • Compatible with internal and external wastegates.
  • Used to control pressure application to a single wastegate port.
  • Provides better control accuracy and resolution than 4-Port BCS.
  • Capable of producing boost levels at least 2 times greater than wastegate spring pressure on most applications.
  • Limited ability to counteract boost taper caused by exhaust manifold back pressure without the use of CO2 or compressed air.

4-PORT BCS OVERVIEW

  • Compatible with external wastegates or dual port internal wastegates.
  • Used to alternate pressure application between two wastegate ports.
  • Has reduced control accuracy and resolution compared to 3-Port BCS.
  • Capable of producing boost levels at least 4 times greater than wastegate spring pressure on most applications.
  • Extremely effective at counteracting boost taper caused by exhaust manifold back pressure without the use of CO2 or compressed air.
  • Can also be used in 3-port BCS configuration by plugging one of the ports.

In The Box